Ապրանքների կատալոգ

IC-A120

Description

General

IC-A120

Frequency range (Tx/Rx) 118.000–136.992 MHz
Channel spacing 25kHz/8.33kHz
Type of emission 6K00A3E, 5K60A3E (FCC/EXP)
6K00A3E (Industry Canada)
Operating temperature range –30˚C to +60˚C; –22˚F to +140˚F
Frequency stability ±5ppm (–30˚C to +60˚C)
Antenna connector SO-239 (50Ω)
Number of memory channels 200 channels
Power supply requirements 13.75V/27.5V DC
Current drain
(at 13.75V)
Tx 5.0A (maximum)
Rx Stand-by 0.5A
Max. audio 4.0A
Dimensions (W×H×D)
(Projections are not included)
161×45×175 (mm)
6.34×1.77×6.89 (in) (approximately)
Weight (approximately) 1.5kg; 3.3lb (main unit)

Transmitter

IC-A120

Output power (at 13.75V)
(Carrier Power)
9.0W typical
10.0W maximum
Spurious emissions Less than –60dBc
Modulation 70% to 100%
Microphone impedance 600Ω

Receiver

IC-A120

Intermediate frequencies 38.85MHz/450kHz (1st/2nd)
Sensitivity (at 6dB S/N) Less than 1μV
Selectivity 8.33kHz 2.778/7.37kHz (6dB/60dB)
25kHz 8/25kHz (6dB/60dB)
Spurious response rejection More than 74dBμ
Audio output power
(at 10% distortion,
60% modulation)
Internal SP
(8Ω load)
1.5W typical
External SP
(8Ω load)
More than 10W
Headphone
(500Ω load)
More than 100mW

Measurements made in accordance with FCC Part 87 and Industry Canada for USA version. All stated specifications are subject to change without notice or obligation.

Applicable U.S. Military Specifications & IP Rating

Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.

Standard MIL-810 G
Method Procedure
Low Pressure 500.5 I, II
High Temperature 501.5 I, II
Low Temperature 502.5 I, II
Temperature Shock 503.5 I-C
Solar Radiation 505.5 I
Humidity 507.5 II
Vibration 514.6 I
Shock 516.6 I, IV

Also meets equivalent MIL-STD-810-C, -D, -E and -F.

Applicable IP Rating

Ingress Protection Standard

Dust & Water IP54 (Dust-protection and water resistance)

All stated specifications are subject to change without notice or obligation.